Pressure Systems 9022 Bedienungsanleitung PDF herunterladen (Seite 139)

www.meas-spec

.com

Measurement Specialties, Inc. NetScanner System (9016, 9021, & 9022) User’s Manual

5 - 4

In the process of performing general maintenance on a module and in printed-circuit board

replacement, the following tools may be required:

• 3/32" and 5/64" Allen-head screwdrivers,

• a 3/16" hex wrench,

• a needle nose tweezers,

• a Phillips-head screwdriver,

• a small adjustable wrench,

• a tube of Krytox

lubricant (P/N 42-06-KRYX),

• a spray bottle of silicone liquid lubricant (P/N

41-06-Silicone).

When performing any type of maintenance of NetScanner



System components, the following

guidelines and precautions should always be followed:

• Verify that the work area and technicians are properly grounded to prevent

damage to electronic components due to electrostatic discharge.

• Ensure that all electrical and pneumatic connections have been removed

from the module.

• Ensure that the work area is free of dust and other possible contaminants that

may affect the high tolerance machined parts (and pneumatic seals, if model has

an integral manifold).

• Care must be taken to prevent contaminants from reaching O-ring surfaces. If

O-ring surfaces require cleaning, use a lint-free applicator with acetone to

remove dirt and lightly lubricate the O-ring surface with Krytox® provided in

the maintenance kit.

• Never use sharp objects to cut tubing from the bulged tubes. The tiny scratches

left on the tubes could cause leaks.

NOTE: MEAS offers an

optional maintenance kit (P/N

S901-0200000000) with the

lubricants included.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 193 194

Keine Kommentare

Pressure Systems 9022 Bedienungsanleitung Seite 139